This is for 2 rolls of High Heat PLA 1.75mm filament. (Select your colors)
We use this filament on all of our 3D Printed parts and kits. Using a higher print temperature, we are able to get great bed adhesion, better layer bonding and less clogging.
- Filament Manufactured in USA by PushPlastics
- High heat PLA is made from Natureworks 3D850 PLA
- Printed parts made from this PLA can be heat treated, which can obtain properties that exceed ABS. To achieve a heat treat on a printed part, submerge in water (or bake in oven) at 200F for up to 30 minutes. Note: This method does not work for Single Wall Printing.
Manufactured in the USA using High Heat PLA resin. This material is a great substitute for normal PLA when greater heat resistance and impact strength is desired.
-Manufactured from 100% virgin resin and then spooled onto 1 kilogram reels, the filament is then vacuum-sealed with desiccant.
-We offer 1.75mm diameter and 2.85mm on request, this filament will convert anyone who prints with normal PLA!
Recommended Print Conditions:
- Extruder Temp: 200-230°C
- Bed Temp: 0-60 C