P-38 Servo Breakout Board V1

$14.95

Servo Breakout Board

Description

Version 1 is a single board, all wires run from the outer nacelles to the center and plug into this board.

Using this board on your P-38 will save weight and keep a “rats nest” from¬† developing with your wiring harness. All servos plug into this board allowing you to do away with “Y” cables. The servo pin-outs on the board are powered by an external BEC and the landing gear is powered by one of the ESC’s.

Includes the board and wiring harness.

Designed by RocketMan1092 from RCG.

 

Additional information

Weight 2 oz
Dimensions 3 × 3 × 2 in

Downloads

Wiring Schematic

 

Vendor Information

  • Store Name: 3DPrintedKits
  • Vendor: 3DPrintedKits
  • Address: San Diego, CA 92117
  • No ratings found yet!